DM KNT 002: Surface mounting PIR movement detector with TP-KNX BUS input for lighting control

Surface mounting PIR movement detector with TP-KNX BUS input for lighting control

DESCRIPTION

• KNX PIR motion detectors with luminosity sensor.The lux level and time delay can be set with the control knobs, by using the IR remote control (EM MAN DM0) or via ETS.
• One PIR sensor and a high resolution lens can detect the smallest movement.
• The built-in light sensor measures the brightness on a continuous basis and compares it to the level preset on the control knob (or by means of the remote control EM MAN DM0 or by ETS).
• Depending on the parameterization by ETS, this detectors can work as:
  · Motion detection: depending on the movement and the daylight.
  · Twilight switch: teach-in brightness threshold for daylight-dependent switching.
  · Constant light control: with dimming telegrams.
  · Signal monitoring: motion detection without brightness sensor.
  · Brightness sensor: light sensor without motion detection.
  · Temperature sensor: sends the temperature value.
• Wall mounted.
• Detection area of 180º and maximum 10m at 2m high.
• Programation by ETS: programa ETS3 / programa ETS4