IBOX-KNX-DALI: DALI to KNX Gateway

On the KNX side, IntesisBox simulates a KNX device and acts as if it was a single device into the KNX system providing control of the DALI ballasts connected to IntesisBox.The IntesisBox's KNX interface connects directly to the KNX bus and it is optoisolated from the rest of the internal electronics.

FEATURES:

• Providing a DALI physical channel with the necessary bus voltage (about 15V) and current regulation (max. 250mA).
• Setting the proper configuration values of the DALI ballasts (addresses, groups, max/min levels…).
• Performing control and monitoring of the DALI ballasts in the DALI bus from a KNX control system, so that the ballasts become part of the own KNX system.
• Support for DALI multi-master
• DALI commissioning tool included with IntesisBox MAPS
• Support for
  • Fluorescence
  • LED
  • Emergency
• Datalogging through external USB port
• Configuration through IP or USB (Console) port
• Front cover LED indicators to provide easy to check communication status on both the Ethernet and serial ports
• Includes IntesisBox MAPS with automatic updates for both IntesisBox MAPS and Gateway’s firmware

Integration of DALI Ballasts into a KNX installation