Domů Výrobci>Dinuy>DM KNT 003: Flush box mounting PIR movement detector with TP-KNX BUS input for lighting control

Dinuy

DM KNT 003: Flush box mounting PIR movement detector with TP-KNX BUS input for lighting control

DM KNT 003: Flush box mounting PIR movement detector with TP-KNX BUS input for lighting control

Dostupnost: 5 - 8 pracovních dní

DM KNT 003
Dinuy

Flush box mounting PIR movement detector with TP-KNX BUS input for lighting control

Flush box mounting PIR movement detector with TP-KNX BUS input for lighting control

DESCRIPTION

  • KNX PIR motion detectors with luminosity sensor.The lux level and time delay can be set with the control knobs, by using the IR remote control (EM MAN DM0) or via ETS.
  • One PIR sensor and a high resolution lens can detect the smallest movement.
  • The built-in light sensor measures the brightness on a continuous basis and compares it to the level preset on the control knob (or by means of the remote control EM MAN DM0 or by ETS).
  • Depending on the parameterization by ETS, this detectors can work as:
    · Motion detection: depending on the movement and the daylight.
    · Twilight switch: teach-in brightness threshold for daylight-dependent switching.
    · Constant light control: with dimming telegrams.
    · Signal monitoring: motion detection without brightness sensor.
    · Brightness sensor: light sensor without motion detection.
    · Temperature sensor: sends the temperature value.
  • Flush mounted in universal mechanism box.
  • Detection area of 200º and maximum 8m.
  • Programation by ETS: programa ETS3 / programa ETS4

DM KNT 001, 002, 003 User Manual

Ke stažení (870.42k)

DM KNT 003 - instruction

Ke stažení (1.16M)

související zboží

Potřebujete poradit?Zeptejte se nás!

novinky

Nechte si zasílat speciální nabídky a novinky v našem e-shopu.