RE K5X DA1: 1-channel KNX RF S-Mode wireless Dimming actuator for DALI Drivers or Ballasts, with LED or Fluorescence lighting

RECEIVERS/ACTUATORS

Wired & wireless small size for box installation, DALI ballasts or LED drivers. Max 64 driv.

DESCRIPTION

• 1-channel KNX RF S-Mode wireless Dimming actuator for DALI Drivers or Ballasts, with LED or Fluorescence lighting.
• Allows upgrading the KNX installation without placing KNX bus wires.
• Operates in KNX RF+ protocol in System-Mode.
• Communication with the KNX Bus must be carried out using a KNX / KNX RF S-Mode
  media coupler: “CO K5X 002”.
• Power supply: 230VAC 50/60Hz.
• Different functions which can be configured with ETS:
  · Time of soft on and off.
  · Maximum and minimum dimming level.
  · Behavior after on telegram.
• Staircase time switch and Sequential operation modes.
• Auxiliary Pushbutton input with configurable operation.
• It incorporates the KNX-RF signal repeater function (optional), which allows extending
  the distance between transmitters and receivers.
• Adjustable behavior in case of bus voltage failure.
• 5 pre-configured scenes.
• Flush mounted in junction box.
• Programming and commissioning by ETS5 via the KNX-RF+ USB stick “CO K5X 001”.
  
  
  

TECHNICAL CHARACTERISTICS