RE KNT 110: 1/10VDC Dimmer, TP-KNX BUS, 3 channels

1/10VDC Dimmer, TP-KNX BUS, 3 channels

DESCRIPTION

• 1/10VDC Dimming Actuator for Drivers or Ballasts, with fluorescent tubes or LED lighting.
• 3 output channels, with a maximum of 3A per channel.
• It has 2 control elements for switching/dimming the load:
  · K relay: 3 independent contacts that open or close the phase output to the drivers or ballasts.
  Therefore, with this relay, we will control the power supply of the luminaires. If a greater number
  of electronic ballasts or drivers with high inrush currents are to be connected, a separate load
  contactor is recommended.
  · 1-10VDC Analogue Output: dimming signal. The number of electronic ballasts or drivers that can
  be dimmed via the 1-10V output, depends on the ballast-specific 1/10V input current of the
  types used.
• Different functions and parameters can be enabled and parameterised by the ETS: staircase
  lighting timer with warning function, dimming speed, scene control (up to 5), sequential operation,
  soft turn on/off, etc.
• Outputs can be operated manually (even without bus connection).
• The device has integrated overload, short-circuit and over-heating protection.
• Modular installation device. DIN-rail mounting. 5-modules wide.
• Programming and commissioning by ETS4 or later.
  
  

TECHNICAL CHARACTERISTICS