TRANSMITTERS/SENSORS

4- CHANNEL, KNX RF (ETS5) UNIVERSAL INTERFACE 230 V.


DESCRIPTION

  • Wireless KNX RF S-Mode transmitter with 4 Analog or Binary Inputs.
  • The Universal Interface incorporates 4 inputs, each of which can be parameterized individually through the ETS:
    • Switch.
    • Dimmer.
    • Multiple Switch.
    • Sequential Switch.
    • Shutter control.
    • Scenes management.
    • Sending of Fixed/Forced Value.
    • Counter.
    • Temperature sensor, connecting the DINUY temperature probes ST KNT 001 or 002.
    • Movement Detector, connecting the DINUY sensor “DM KNT 004”.
  • It also incorporates up to 4 independent Thermostats for the control of Heating and / or Cooling of 4 different zones.
  • Programming and commissioning by ETS5 or later.
  • Perfect solution for using in conventional installations without placing KNX bus cables.
  • Communication with the KNX Bus must be carried out using a KNX / KNX RF S-Mode media coupler.


TECHNICAL CHARACTERISTICS

Reference EM K5X 004
Power supply 230V~ 50/60Hz
Power consumption 30mA
KNX Medium KNX-RF 1.R
Radio-frecuency 868,3MHz
Transmission Power <10dB
Range In free field: ~100m
Indoors: ~ 30m
Cable length < 10m
Temperature accuracy ±0,3ºC between -10ºC & +70ºC
Application Software ETS5 or later
Commissioning Mode System Mode
Dimensions 46 x 46 x 21mm
Protection Degree IP20
Working Temperature 0ºC … +45ºC

související zboží

Potřebujete poradit?Zeptejte se nás!

novinky

Nechte si zasílat speciální nabídky a novinky v našem e-shopu.