RECEIVERS/ACTUATORS

Wired & wireless small size for box installation, 1/10Vdc ballasts or LED drivers. Max 100 driv.


DESCRIPTION

  • 1-channel KNX RF S-Mode wireless Dimming actuator for 1/10VDC Drivers or Ballasts, with LED or Fluorescence lighting.
  •  Allows upgrading the KNX installation without placing KNX bus wires.
  • Operates in KNX RF+ protocol in System-Mode.
  • Communication with the KNX Bus must be carried out using a KNX / KNX RF S-Mode
    media coupler: “CO K5X 002”.
  • Power supply: 230VAC 50/60Hz.
  • Different functions which can be configured with ETS:
    · Type of dimming: leading or trailing edge.
    · Time of soft on and off.
    · Maximum and minimum dimming level.
    · Behavior after on telegram.
  • Staircase time switch and Sequential operation modes.
  • Auxiliary Pushbutton input with configurable operation.
  • It incorporates the KNX-RF signal repeater function (optional), which allows extending
    the distance between transmitters and receivers.
  • Adjustable behavior in case of bus voltage failure.
  • 5 pre-configured scenes.
  • Flush mounted in junction box.
  • Programming and commissioning by ETS5 via the KNX-RF+ USB stick “CO K5X 001”.


TECHNICAL CHARACTERISTICS

Reference RE K5X 010
Power supply 230Vac 50/60Hz
Consumption <5W
Type of Load 1/10Vdc Drivers or Ballasts
Relay breaking Capacity 5A / 250V
Maximum Capacity 1150VA
1/10V Maximum Input Current 500mA
1/10V Maximum Output Current 250mA
KNX Medium KNX-RF 1.R
Radio-frecuency 868,3MHz
Transmission Power < 10dBm
Range In a free field: 100m // Indoors: 30
Number of Outputs 1
Application Software ETS5
Commissioning Mode System-Mode
Mounting Flush-mounting within universal box
Dimensions 46 x 46 x 30mm
Protection degree IP20
According to the Standard EN60669-2-1
Compatible with IEC14543-3



související zboží

Potřebujete poradit?Zeptejte se nás!

novinky

Nechte si zasílat speciální nabídky a novinky v našem e-shopu.