CO K5X 001: KNX-RF usb interface

5 - 8 pracovních dní

Kód produktu: CO K5X 001

Výrobce : Dinuy

Rychlý přehled:

COMMUNICATION

KNX-RF USB INTERFACE

COMMUNICATION

KNX-RF USB INTERFACE

DESCRIPTION

The KNX RF/TP Coupler is a compact KNX radio coupler.
It connects KNX RF devices of a radio line with the KNX Bus Twisted Pair.
The device has a filter table (8k byte). The coupler supports long frames and is compatible with the ETS® software ETS5 or higher.
The buttons on the front panel allow disabling the telegram filter for testing purposes.
The LEDs indicate operating conditions as well as communication errors on the KNX bus.
The power is supplied via the KNX bus (main line).

TECHNICAL CHARACTERISTICS

Reference	CO K5X 001
Power supply	< 50 mA
RF Interface	KNX RF, ISM Band 868,3 MHz, FSK/ Output power <10mW
Mechanical Data	Housing: Transparent plastic (ABS)
Dimensions	71 x 23 x 8,7mm
Mounting	Use indoor areas only, it can be connected directly to a USB port of a PC or Laptop.
Connectors	Connector for KNX Bus Internal antenna
Protection Degree	Ambient temp. operating: – 5 … + 45 °C Ambient temp. non-op.: – 25 … + 70 °C Rel. humidity (non-condensing): 5 % … 93 %
Security	Protection (acc. EN 60529): IP 20
According to the Standard	Low voltage directive 2014 / 35 / EU EMC directive 2014 / 30 / EU Radio equipment directive 2014 / 53 / EU RoHS directive 2011 / 65 / EU (RoHS2) EN 50491-3: 2009 EN 50491-5-1: 2010 EN 50491-5-2: 2010 EN 50491-5-3: 2010 EN 61000-6-2: 2005 EN 61000-6-3: 2007 + A1: 2011 EN 300 220-2: V3.1.1 EN 50581: 2012 (RoHS2)