TRANSMITTERS/SENSORS

RF Remote control for the CO KNX 001 & RE KNX DA1


DESCRIPTION

  • The Radio Remote Control sends KNX telegrams when one of the keys is presse depending on its
    parameterisation.
  • The KNX-RF hand-held remote control transmits KNX telegrams wirelessly when the key is pressed.
    These could include telegrams for switching, dimming, blind/shutter control or lighting scenes
    saving/recovering.
  • Incorporates 5 independent channels, 1 main channel and 5 scene channels.
  • Battery-operated: 1 x 3V Lithium battery CR2032. Useful life higher than 8 years.
  • Power supply: 1X3V baterry CR2032. Useful life: > 8 years.
  • Radio-frequency: 868,4MHz.
  • Range: up to 100m (in the free field).
  • Compatible with: CO KNX 001, IT KNX 001, CO KNX 002, PE KNX 001, MI KNX 001, RE KNX LE1,
    RE KNX LE2, RE KNX LE3, RE KNX RGB, RE KNX 010 & RE KNX DA1.


TECHNICAL FEATURES

Reference RC KNX 001
Power Supply 1 battery 3V CR2032 (included)
Battery life >8 years (with <100 act/day)
Radio-Frequency Codified transmission in 868,4MHz with and a maximum coverage of 100 (in the free field)
Compatible with RF-KNX:
CH_Generic Switch_5 (0311h)
CH_Battery_Status (0021h)
Working Modes Switch ON/OFF
Dimmer
Blind/Shutter Control
Scenes (2)
DINUY’s Compatible Devices CO KNX 001, IT KNX 001, MI KNX 001, PE KNX 001, CO KNX 002, RE KNX LE1, RE KNX LE2, RE KNX LE3, RE KNX DA1, RE KNX 010 & RE KNX RGB
Dimensions 105 x 50 x 12mm
Working Temperature 0ºC ~ +45ºC
Protection Degree IP20, according to EN20324



související zboží

Potřebujete poradit?Zeptejte se nás!

novinky

Nechte si zasílat speciální nabídky a novinky v našem e-shopu.